D&R ELECTRONICS CO. LTD.

PDU-2SS-12

Description:

PDU-2SS-12 is a single point power distribution system with with output 1 at a maximum load capacity of 40 Amps and output 2 with maximum load capacity of 20 Amps.
Available in 12V (PDU-2SS-12) or 24V (PDU-2SS-24) options
Built with all solid state components for reliability
Outputs are divided into two groups
Each group is individually programmed for time shutdown, after ignition is turned off
Four position dip switch allows the end user to set up the threshold time for each individual group
Voltage monitoring sensor to protect the battery
Dimensions: L-4.4" x W-2.5" x H-0.7"
Vehicle battery voltage monitorin
Low battery voltage shutdown prevents a dead battery, Factory default parameter is set at 11.5V DC (10 Second Delay) or can be factory set between (10 V DC to 13 V DC) based on Clients requirements.
High Voltage Disconnect at approximately 18V (10 Second Delay)
See Specs Sheet for more

PDU-2SS-12 is a single point power distribution system with with output 1 at a maximum load capacity of 40 Amps and output 2 with maximum load capacity of 20 Amps.
Available in 12V (PDU-2SS-12) or 24V (PDU-2SS-24) options
Built with all solid state components for reliability
Outputs are divided into two groups
Each group is individually programmed for time shutdown, after ignition is turned off
Four position dip switch allows the end user to set up the threshold time for each individual group
Voltage monitoring sensor to protect the battery
Dimensions: L-4.4" x W-2.5" x H-0.7"
Vehicle battery voltage monitorin
Low battery voltage shutdown prevents a dead battery, Factory default parameter is set at 11.5V DC (10 Second Delay) or can be factory set between (10 V DC to 13 V DC) based on Clients requirements.
High Voltage Disconnect at approximately 18V (10 Second Delay)
See Specs Sheet for more